Search this wiki

Open the full search page

Systems

Anime Crusaders X built-in macro

The built-in Macro is free and has no level requirement. Enter the stage first, then choose This Stage, Loop, or a Routine. Do not download an executor.

The Macro menu is inside the official experience. It does not ask for a download, a level, or a Roblox password. Third-party executors are a different risk and are covered on the scripts page.

Start a run

  1. Enter the stage you want to repeat. The example in the guide is Story, Planet Namak, Act 1 - Evil Elegance, Normal.
  2. Open Macro and set Units and placement. Smart Macro places, upgrades, and sells. It prioritizes farms, focuses bosses, handles leaks, and switches to anti-air units when Flying enemies arrive.
  3. Under Run, choose This Stage for one clear, Loop to repeat the current stage, or Routine for a queue.
  4. Pick an optimization setting and press Start. The floating panel uses Pause, Stop, and Open.

Recording mode stores placements you make. Smart placement learns where units stand. Use the mode that matches the stage you already cleared by hand.

Build a Routine

Open Macro, then Routine, and choose New. Select that Routine and Add Task. Set Mode, World, Act, and Difficulty. For a count, set Play until to Runs and enter the number. A published example is 5 runs of Planet Namak Act 1 on Normal. A mixed queue can put raid runs before story runs. Use the up and down controls to order tasks. When it ends can be set to Repeat. Set as Start or Play from Here chooses the first task. Then select Routine in Run.

Dailies has an Auto Challenge option for challenge categories. The exact challenge list changes, so read the categories shown that day.

If the run places units in the wrong lane, stop it and record the placement yourself before you loop overnight. The Macro does not change drop rates.